AMQ ACTIV-PRO Installation Manual page 13

PHASE 8 | Program Height Memory Presets
Step 1
To Program Up to 4 Presets: Use the up/down
arrows to find desired height, then press "M"
followed by the number 1, 2, 3 or 4.
ACTIV-PRO INSTALLATION GUIDE | 13
Step 2
To Test Programmed Height: Use the up/down
arrows to adjust the table to a height other than
the preset height. Then push the number you
programmed to see if it automatically adjusts to
the height programmed in Step 1. You may need to
hold for 2-3 seconds to activate the base.
If it does not adjust to the programmed
NOTE:
height, repeat Step 1 followed by Step 2.
amqsolutions.com