Setting Up And Connection; Setting Up - Roland CAMM-3 PNC-3200 User Manual

3

Setting Up and Connection

Setting Up

Install on a stable surface.
Failure to do so
may result in
falling of the unit,
leading to injury.
Do not place anything within the
moving area of the XY table.
The object may bump into the XY table and
fall, resulting in injury.
NOTICE
Use within a temperature range of 5 to 40°C (41 to 104°F) and within a humidity range of 35 to 80%.
Do not place any objects on the main unit's head or rear cover.
To prevent accidents, do not install in any of the following types of areas.
• Avoid use in areas subject to strong electric noise.
• Avoid use in areas subject to high humidity or dust.
• The PNC-3200 generates heat when used, and should not be installed in an area with poor heat radiation
characteristics.
• Do not install in an area subject to strong vibration.
Installation of the PNC-3200 requires a minimum
space measuring 800 mm (31-1/2 in.) high by 1,000
mm (39-3/8 in.) wide by 1,000 mm (39-3/8 in.) deep.
12
Moving area of
the XY table
800 mm
(31-1/2 in.)
1000 mm
(39-3/8 in.)
Moving the unit is an operation that
must be carried out by two or more
persons, grasping the grips at the
front and rear of the unit.
If grasped by the
rear cover, the unit
may fall, resulting
in injury.
Unpacking, installation, and moving
must be carried out by two or more
persons.
Failure to do so may result in falling of the
unit, leading to injury. (The machine weighs
60 kg (132.3 lb.). )
1000 mm
(39-3/8 in.)