Checking The Accessories - Roland CAMM-3 PNC-3200 User Manual

1

Checking the Accessories

The following items are packed together with the unit.
These are installed
on the unit.
Collet cap Collet chuck Z0 position sensor
*
22 mm 30 mm
*
17 mm
(1.18 in.)
(0.87 in.)
(0.67 in.)
*T nuts : 2 Spanners Spanner
(For installing the work attachment) (For tool attachment) (For removal of the securing board)
Power cord
Cable Roland Software Package
(For connecting the switch panel) CD-ROM
NC Code
Key connector USER'S MANUAL
PROGRAMMER'S MANUAL
(The machine does not run unles this is inserted.) (1 Setup & Maintenance)
(2 Cutting Using RML-1)
(3 Cutting Using NC codes)
MODELA 3D DESIGN/
MODELA 3D TEXT/
MODELA Player
USER'S MANUAL
(In this documentation, please replace
Items indicated by "*" are included in the bag of tools.
"MDX-3" with "PNC-3200" as you read.)
10