Siemens SITRANS TSinsert TS100 Compact Operating Instructions page 29

Versions
Type 2G, pipe version with screw-in
nipple and extension
Type 2F, pipe version with flange and
extension
Type 3, fast pipe version without
process connection
Type 3G, fast pipe version with screw-
in nipple and extension
Type 3F, fast pipe version with flange
and extension
Types 4 and 4F, full material version,
with extension
SITRANS TS500 for installation in
existing protective tubes
Table 9-5 Overview of SITRANS TSinsert dimensional drawings: measuring inserts for retrofitting and upgrading
Versions
European design
American design
SITRANS TSinsert/TS100/TS200/TS300/TS500
A5E32897098-01, 09/2013
Description
● Temperature sensors for containers and pipelines, pipe version for low to
medium stress, protective tube in accordance with DIN 43772, type 2G, for
screwing-in, with extension
● SITRANS TS500, types 2G and 2F (Page 36)
● Temperature sensors for containers and pipelines, pipe version for low to
medium stress, protective tube in accordance with DIN 43772, type 2F, with
flange, with extension
● SITRANS TS500, types 2G and 2F (Page 36)
● Temperature sensors for containers and pipelines, pipe version for low to
medium stress, without process connection, without extension, for plugging-in
or use with sliding compression joints
● SITRANS TS500, type 3 (Page 37)
● Temperature sensors for containers and pipelines, pipe version for low to
medium stress, protective tube in accordance with DIN 43772,
type 3G, for screwing-in, without process connection, with extension
● SITRANS TS500, types 3G and 3F (Page 38)
● Temperature sensors for containers and pipelines, pipe version for low to
medium stress, protective tube in accordance with DIN 43772, type 3F, with
flange, with extension
● SITRANS TS500, types 3G and 3F (Page 38)
● Temperature sensors for containers and pipelines, full material version for
medium to very high stress, protective tube in accordance with DIN 43772,
type 4, for welding-in, with extension
● Protective tube type 4F, with flange, with extension
● SITRANS TS500, types 4 and 4F (Page 39)
● Temperature sensors for containers and pipelines, temperature sensors for
installation in existing protective sleeves, suitable for sleeves in accordance
with DIN 43772 and ASME B40.9-2001, with extension of European or
American design
● SITRANS TS500 for installation in existing protective tubes (Page 40)
Description
● Measuring inserts for temperature sensors, replaceable, mineral-insulated
version, European design (DIN ceramic base),
spring approx. 8 mm (0.31 inch)
● SITRANS TSinsert - measuring inserts for SITRANS TS500 (Page 41)
● Measuring inserts for temperature sensors, replaceable, mineral-insulated
version, American design, spring approx. 25 mm (0.98 inch)
● SITRANS TSinsert - measuring inserts for SITRANS TS500 (Page 41)
29