Biostar CX70M-PE Setup Manual page 49

Wakeup Event Detect
USB Resume from S3
This item allows you to wake up from S3 with USB device.
The Choices: Disabled (Default) / Enabled
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the
system to Full ON state.
For this function to work, you may need a LAN add-on card which
supports the Wake on LAN function. Set the Wake on LAN (WOL)
jumper on mainboard to enable if applicable.
The Choices: Disabled (Default) / Enabled
Modem Ring Resume
This item allows you to disable or enable Modem Ring Resume
function.
The Choices: Disabled (Default) / Enabled
RTC Alarm Resume
When "Enabled", you can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The Choices: Disabled (Default) / Enabled
CX70M-PE
49