Biostar CX70M-PE Setup Manual page 41

VIA OnChip IDE Device
SATA Controller
This option allows you to enable the on-chip Serial ATA.
The Choices: Enabled (Default) / Disabled
IDE DMA transfer Access
This item allows you to enable or disable the IDE DMA transfer
access.
The Choices: Enabled (Default) / Disabled
OnChip IDE Channel 1
The mainboard chipset contains a PCI IDE interface with support for
one IDE channel. Select "Enabled" to activate the IDE interface.
Select "Disabled" to deactivate the interface if you are going to install a
add-in IDE interface.
The Choices: Enabled (Default) / Disabled
IDE Prefetch Mode
The "onboard" IDE drive interfaces supports IDE prefetch function for
faster drive access. If the interface on your drive does not support
prefetching, or if you install a add-in IDE interface, set this option to
"Disabled".
The Choices: Enabled (Default) / Disabled.
CX70M-PE
41