Biostar CX70M-PE Setup Manual page 38

3.5" Mainboard Manual
AGP Fast Write
This item is used to enable or disable the caching of display data for
the video memory of the processor.
The Choices: Disabled (Default) / Enabled
AGP Master 1 WS Write/Read
This item is used to enable or disable the AGP Master 1 WS
Write/Read function.
The Choices: Enabled (Default) / Disabled
AGP 3.0 Calibration Cycle
The Choices: Enabled (Default) / Disabled
VGA Share Memory Size
This item allows you to select the VGA share memory size.
The Choices: 64M (Default) / 16M / 32M / Disabled
Direct Frame Buffer
This item allows you to disabled or enabled direct frame buffer.
The Choices: Enabled (Default) / Disabled
Select Display Device
This option allows you to select to display device.
The Choices: CRT+DVI (Default) / DVI / CRT
Panel Type
This option allows you to select to type of the panel.
Min=0000, Max=000F, key in a HEX number.
The Choices: 04 (Default)
Outport Port
This option allows you to select to type of out-port.
The Choices: DI0 (Default) / DI1
Dithering
This option allows you turn on/off the dithering function.
The Choices: Disabled (Default) / Enabled
38