Biostar CX70M-PE Setup Manual page 52

3.5" Mainboard Manual
IRQ Resources
This submenu will allow you to assign each system interrupt a type,
depending on the type of device using the interrupt. When you press the
"Press Enter" tag, you will be directed to a submenu that will allow you to
configure the system interrupts.
"Resources Controlled By" is set to "Manual".
IRQ-3
IRQ-4
IRQ-5
IRQ-7
IRQ-9
IRQ-10
IRQ-11
IRQ-12
IRQ-14
IRQ-15
PCI / VGA Palette Snoop
Some old graphic controllers need to "snoop" on the VGA palette and
then map it to their display as a way to provide boot information and
VGA compatibility. This item allows such snooping to take place.
The Choices: Disabled (Default) / Enabled
Assign IRQ For VGA
This item allows the users to choose which IRQ to assign for the VGA.
The Choices: Enabled (Default) / Disabled
Assign IRQ For USB
This item allows the users to choose which IRQ to assign for the USB.
The Choices: Enabled (Default) / Disabled
Maximum ASPM Supported
The Choice: L0s&L1 (Default)
Maximum Payload Size
Set the maximum payload size for Transaction packets (TLP).
The Choice: 4096 (Default.) / 128 / 256 / 512 / 1024 / 2048
52
This is only configurable when
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device