Table of Contents
Advertisement
3.5" Mainboard Manual
Thermal Management
This option allows you to select the way to control the "Thermal
Management."
The Choices: Thermal Monitor 1(Default) / Thermal Monitor 2
Thermal Monitor Bus Ratio
This option sets the frequency (bus ratio) of the throttled performance
that will be initiated when the on die sensor goes from not hot to hot.
Min=4, Max=10, key in a DEC number.
The Choices: 4X (Default)
Thermal Monitor Bus VID
This option sets the voltage of the throttled performance that will be
initiated when the on die sensor goes from not hot to hot.
The Choices: 0.700~1.084 with a interval of 0.016 / 0.844V (Default)
Hard Disk Boot Priority
This is for setting the priority of the hard disk boot order when the
"Hard Disk" option is selected in the "[First/Second/Third] Boot Device"
menu item.
The Choices: Ch0 M.(Channel 0 Master) / Bootable Add-in Cards
30
Advertisement
Table of Contents
