Table of Contents
Advertisement
3.5" Mainboard Manual
2.5
O
NBOARD
ATA Device Connector
The mainboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. It has one
IDE connector.
The IDE connector can connect a master and a slave drive, so you can connect
up to two ATA devices.
Be aware of that the CF socket on the back panel uses IDE Master as
default channel. If the CF socket is inserted with CF card, the ATA
connector would allow only one device and the device should be set to
IDE Slave.
12
S
/C
LOT
ONNECTOR
/H
/J
EADER
UMPER
44
43
2
1
Advertisement
Table of Contents
