Jumper & Switch Setting - Biostar B450MHP Manual

2.6 Jumper & Switch Setting
The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the
jumper is "close", if not, that means the jumper is "open".
Pin opened
JCMOS1: Clear CMOS Jumper
The jumper allows users to restore the BIOS safe setting and the CMOS data. Please carefully
follow the procedures to avoid damaging the motherboard.
Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to "Pin 2-3 short".
3. Wait for five seconds.
4. Set the jumper to "Pin 1-2 short".
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS.
Pin closed
Normal Operation (default).
Chapter 2: Hardware installation | 15
Pin 1-2 closed
Pin 1-2 Short:
Pin 2-3 Short:
Clear CMOS data.