Figure 24: Removing The Right Panel; Figure 25: Front Bezel Anchor Screw - EFI E-45 Installation And Service Manual

Installation and Service Guide: Color Controller E-45 52
Replacing parts
3 Remove the two screws at the bottom rear left of the chassis.

Figure 24: Removing the right panel

4 From the back of the unit, slide the left side chassis cover toward the rear of the unit and remove.
To remove the front panel
1 Remove the anchor screw from the front bezel.

Figure 25: Front bezel anchor screw

2 Release the six tabs and pull the front bezel off.