Readjwrite Board Installation - DEC VAXmate Service Manual

FRU Replacement
IIIII
CONNECTOR
3
NOT USED
(
Figure 5-45 Removing Connector 3
5.3.29 Read/Write Board Installation
1. Attach connector 3 to the read/write board.
NOTE
LJ·0696A
Make sure the pair of pins next to the LED are exposed (Figure
5-45).
2. Hold the hard disk drive firmly, lower the read/write board and carefully
install connector 2 and then connector 1.
3. Install the read/write board.
CAUTION
Remember to install the read/write board insulating washers.
5-59