Figure 2-19 System Test Execution - DEC VAXmate Service Manual

Troubleshooting the VAXmate Workstation
IIIII
Memory
Comm
Video
...
PASSED
PASSED
PASSED
Printer
Mouse
Network
Event Timer
Keyboard
xxxxxxxx
xxxxxxxx
xxxxxxxx
====================
Activity indicator
=
nnnn
=
Subtest 01: F.D.C. Status register test
Subtest 02: F.D.C. Data register test
Subtest 03: F .D.C. Interrupt capability test
Subtest 04: Diskette Drive recalibration test
Subtest 05: Diskette Drive step mechanism test
Subtest 06: Diskette Drive step rate timing test
Subtest 07: Diskette Drive hi·speed rotational speed test
Subtest 08: Diskette Drive verified seek test
Subtest 09: Diskette Drive track/sector read test
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
XXXXX
Reading track : 48 High density mode
=
Total error count
=
0000
Diskette side 0
Total pass count
=
0001
Figure 2-19 System Test Execution
When the test is complete, the following occurs.
LJ-1039
• The Main Diagnostic Menu displays after selected number of passes have
run .
• The word "passed" displays if the test is successful, or "failed" if there is
a failure.
If
there is a failure do the following.
1. Read the error log to display the list of errors. Error log is in effect
unless you choose not to log errors from the Test Option Menu. See
Paragraph 2.5.8 for information about the error log. This also explains
how to print the error log.
2. Find the error number(s) in Appendix C.
3. Replace the failing FRUs. See Chapter 5, FRU Replacement.
4. Run the system test again.
2·43