DEC VAXmate Service Manual page 77

11111
Troubleshooting the VAXmate Workstation
2. Select an option from each group or press the Return key to select. the
default options. For a description of the options, read Paragraph 2.5.5.1.
3. Press Return.
The Individual Test Execution screen displays (Figure 2-21).
It
is similar
to
the System Test Execution screen, explained in Paragraph 2.5.5.3, except for
the following differences.
• Only one test displays (test title and revision number).
• You are prompted to set up certain hardware conditions or to respond to
certain tests. For example, you may be prompted
to
insert a loopback
plug for the communications test, or verify keyc1icks for the keyboard
tests.
2-46
INDIVIDUAL TEST: EVENT TIMER TEST
REV 1.2
=================
Activity indicator
=
0106
====
NOTE: Date and time will be invalid after this test is run.
Subtest 01: Cmos address lines test
Subtest 02: Cmos ram test
Subtest 03: Cmos data retention test
PASSED
PASSED
====
Total error count
=
0000 ======Total pass count
=
0001
====
Figure 2-21 Individual Test Execution
Lj·l041