DEC VAXmate Service Manual page 141

11111
FRU Replacement
15. Remove the CRT assembly as follows.
5-30
a. Push the 4-pin cable through the opening of the CRT shield.
b. Grasp each side to lift the CRT assembly (including spring clip) out
of the VAXmate pivot cradles (Figure 5-24). Do not lift the CRT out
by the neck. The spring clip must clear the tilt channel.
~~
_ _ - - - SPRING CLIP
LEFT
PIVOT
CRADLE
Figure 5-24 Removing the CRT Assembly
l.J·0932