DEC VAXmate Service Manual page 135

11111 FRU Replacement
c. Set the monitor board beside the system unit. You should be able to
rotate the board 90 degrees for easier access to the cables.
d. Unplug the 4-pin cable connector and the 9-pin cable connector from
the monitor board (Figure 5-20).
e. Push the anode wire through the opening in the CRT shield (Figure
5-20).
';~
ANODE
WIRE -
~ f.OMO
/1
~/
POWERSUPPLY
BOARD
.I
LJ-0927
Figure 5-20 Unplugging Cables and Pushing Anode Wire Through
Shield
5-24