3kw low level fan heater with electronic controls and open window detection (10 pages)
Summary of Contents for Consort PHSL2 Series
Page 1
UALITY PACE EATERS Installation & Control Guide for SL Wireless Controlled Plinth Heaters PHSL2 & PHSL3 SERIES All electrical appliances produced for the Company are guaranteed for one year against faulty material or workmanship. This applies only if the appliance has been used for purposes in accordance with the instructions provided and has not been connected to an unsuitable electricity supply, or subject to misuse, neglect, damage or modified or repaired by any person not authorised by us.
Page 2
Overview will re-set. Ensure that the appliance is functioning correctly. If the TOC control operates again, the appliance should be checked by a Please read this guide carefully and retain for future use competent electrician. and maintenance. The heater carries a ‘Do Not Cover’ label to warn the user that if the appliance is covered, there is a risk of This appliance has been designed and manufactured to overheating.
Page 3
Installation Recommendations Installation Procedure It is recommended that careful thought be given to siting the appliance within the room. Try to avoid being Cut a hole in the plinth board, to the dimensions directly in front of the heater for long periods. Consider given in Figure 2.
Page 4
Please refer to the SL installation and control guide for full operational details USTOMER ELPLINE Should you need any advice on the use of your new Consort product please contact our Helpline: Consort Equipment Products Limited Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT Tel: 01646 692172 Fax: 01646 695195 Email: technical@consortepl.com Web:...
Need help?
Do you have a question about the PHSL2 Series and is the answer not in the manual?
Questions and answers