Table of Contents
Advertisement
Quick Links
Q
Installation & Control Guide for Panel Convector Heaters
with Electronic Controls and Open Window Detection
PLE050/SS
PLE125/SS
Consort Equipment Products Ltd.
Registered Office:
Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Tel: 01646 692172
Emails: technical@consortepl.com | sales@consortepl.com
BS EN ISO 9001 Registered Company No FM12671
All electrical appliances produced for the Company are guaranteed for one year against faulty material or
workmanship. This applies only if the appliance has been used for purposes in accordance with the instructions
provided and has not been connected to an unsuitable electricity supply, or subject to misuse, neglect, damage
or modified or repaired by any person not authorised by us. This guarantee is offered to you as an extra benefit and
does not affect your legal rights.
The correct electricity supply voltage is shown on the rating label attached to the appliance.
Reasonable care has been taken to ensure that this guide is accurate at the time of printing. In the interest of
progress the Company reserve the right to vary specifications from time to time without notice.
S
UALITY
PACE
Models
PLE075/SS
PLE150/SS
'SS' suffix added to model number denotes Stainless Steel derivative
Fax: 01646 695195
H
EATERS
PLE100/SS
PLE200/SS
Please note:
66000852 Iss 02
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Consort PLE050/SS
Summary of Contents for Consort PLE050/SS
- Page 1 PLE100/SS PLE125/SS PLE150/SS PLE200/SS Please note: ‘SS’ suffix added to model number denotes Stainless Steel derivative Consort Equipment Products Ltd. Registered Office: Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT Tel: 01646 692172 Fax: 01646 695195 Emails: technical@consortepl.com | sales@consortepl.com...
- Page 2 Overview will re-set. Ensure that the appliance is functioning correctly. If the TOC control operates again, the appliance should be checked by a Please read this guide carefully and retain for future use competent electrician. and maintenance. The heater carries a ‘Do Not Cover’ label to warn the user that if the appliance is covered, there is a risk of This appliance has been designed and manufactured to overheating.
- Page 3 Installation Fig. 1 195mm See Note 16 for Mounting ILLIMETRES ATTS PLE050/SS PLE075/SS PLE100/SS 1000 PLE125/SS 1250 PLE150/SS 1500 PLE200/SS 2000 66000852 Iss 02...
- Page 4 Time Prog SET TIME SET PROGRAMME PRESS AND HOLD PRESS AND HOLD FOR 5 SECONDS FOR 5 SECONDS MODE SELECTION EMPERATURE SET BOOST, MANUAL, Temp Mode WHEN DISPLAY SHOWS SETBACK AND ROOM TEMPERATURE, PROGRAM PRESS TO ADJUST 1. Basic Operation 5.
- Page 5 8. Set 7-day programme An example of one day programme on PLE PROGRAM 1 PROGRAM 2 PROGRAM 5 PROGRAM 6 PROGRAM PROGRAM ºC 19ºC 22ºC 22ºC 16ºC 10ºC 4ºC 06:00 08:00 12:00 14:00 16:00 22:00 Logic diagram for setting programme on PLE Press and hold PROG for 5 seconds to enter the PROG TEMP...
- Page 6 13. Open Window Detection 15. Optional PLK1 Locking Device Ensuring you don’t waste energy on heating the outside The PLK1 locking device can be used to mechanically world, the heater is equipped with optional open / lock the controls to prevent tampering with settings. As it closed window detection.
Need help?
Do you have a question about the PLE050/SS and is the answer not in the manual?
Questions and answers