Advertisement
Quick Links
Q
S
H
UALITY
PACE
EATERS
Installation & Control Guide for
Low Surface Temperature Convector Panel Heaters
with Electronic 7-Day Timer
Models
LST500E, LST800E
All electrical appliances produced for the Company are guaranteed for one year against
faulty material or workmanship.
This applies only if the appliance has been used for
purposes in accordance with the instructions provided and has not been connected to an
unsuitable electricity supply, or subject to misuse, neglect, damage or modified or repaired
by any person not authorised by us. This guarantee is offered to you as an extra benefit and
does not affect your legal rights.
The correct electricity supply voltage is shown on the rating label attached to the
appliance.
Reasonable care has been taken to ensure that this guide is accurate at the time of
printing. In the interest of progress the Company reserve the right to vary specifications from
time to time without notice.
66000918 Iss 02
Advertisement
Related Manuals for Consort LST500E
Summary of Contents for Consort LST500E
- Page 1 Low Surface Temperature Convector Panel Heaters with Electronic 7-Day Timer Models LST500E, LST800E All electrical appliances produced for the Company are guaranteed for one year against faulty material or workmanship. This applies only if the appliance has been used for...
-
Page 2: Connection To The Main Supply
Overview Note: When switched on for the first time the appliance may emit a slight smell. This is purely the evaporation of a fluid used Please read this guide carefully and retain for future use in the manufacturing process. and maintenance. WARNING: This appliance must be earthed. -
Page 3: Installation
Installation ILLIMETRES ATTS LSTE500E LSTE800E 1183 66000918 Iss 02... - Page 4 SET TIME SET PROGRAMME Time Prog PRESS AND HOLD PRESS AND HOLD FOR 5 SECONDS FOR 5 SECONDS MODE SELECTION EMPERATURE SET BOOST, MANUAL, WHEN DISPLAY SHOWS Mode Temp SETBACK AND ROOM TEMPERATURE, PROGRAM PRESS TO ADJUST 1. Basic Operation 5.
- Page 5 8. Set 7-day programme An example of one day programme on LSTE PROGRAM 1 PROGRAM 2 PROGRAM 5 PROGRAM 6 PROGRAM PROGRAM ºC 19ºC 22ºC 22ºC 16ºC 10ºC 4ºC 06:00 08:00 12:00 14:00 16:00 22:00 Logic diagram for setting programme on LSTE Press and hold PROG for 5 seconds to enter the time setting.
- Page 6 13. Open Window Detection 14. Setup Menu Ensuring you don’t waste energy on heating the Press and hold TEMP and MODE together for outside world, the heater is equipped with optional 5 seconds. open / aclosed window detection. The heater The display will enter the setup menu.
- Page 7 Locking screw Locking tab USTOMER ELPLINE Should you need any advice on the use of your new Consort product please contact our Helpline: Consort Equipment Products Limited Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT Tel: 01646 692172 Fax: 01646 695195 Email: technical@consortepl.com Web: www.consortepl.com...
Need help?
Do you have a question about the LST500E and is the answer not in the manual?
Questions and answers
Light furnace
The function of the Consort LST500E light furnace is to provide safe, controlled heating with a low surface temperature, meeting NHS safety requirements. It includes a 7-day timer with up to 6 programmable heating steps per day and has a thermally operated cut-out (TOC) for overheating protection.
This answer is automatically generated