Removing And Replacing Covers; Removing The Service Access Cover - IBM Power System 8335-GTW Manual

Removing and replacing covers on an 8335-GTC, 8335-GTG, 8335-GTH,
8335-GTW, or 8335-GTX system
Learn how to remove and replace the covers for an IBM Power System AC922 (8335-GTC, 8335-GTG, and
8335-GTH) or IBM Power System AC922 (8335-GTW and 8335-GTX) system so that you can access the
hardware parts or service the system.
Removing the service access cover from an 8335-GTC, 8335-GTG, 8335-GTH, 8335-GTW,
or 8335-GTX system
To remove the service access cover, complete the steps in this procedure.
Procedure
1. Ensure that you removed both power supplies from the system.
For instructions, see "Preparing the 8335-GTC, 8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX
system to remove and replace internal parts" on page 198.
(L005)
CAUTION: Hazardous energy present. Voltages with hazardous energy might cause heating
when shorted with metal, which might result in splattered metal, burns, or both. (L005)
2. At the rear of the system, loosen the cover screw (A) that fastens the cover to the chassis.
206 Power Systems: Servicing the 8335-GTW