Graphics Processing Unit; Removing The Graphics Processing Unit From A Water-Cooled System - IBM Power System 8335-GTW Manual

Figure 83. Installing the fan power cable
What to do next
Prepare the system for operation. For instructions, see "Preparing the 8335-GTC, 8335-GTG, 8335-GTH,
8335-GTW, or 8335-GTX system for operation after you remove and replace internal parts" on page 202.
Removing and replacing a graphics processing unit in the 8335-GTW or
8335-GTX system
Learn how to remove and replace a graphics processing unit (GPU) in the system.
Removing the graphics processing unit from a water-cooled 8335-GTW or 8335-GTX
system
To remove a graphics processing unit from a water-cooled system, complete the steps in this procedure.
Before you begin
Power off the system and place it in the service position. For instructions, see "Preparing the 8335-GTC,
8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX system to remove and replace internal parts" on page
198.
Removing and replacing parts in the 8335-GTW or 8335-GTX 91