Raymarine ST60 Tridata Instrument Owner's Handbook Manual page 50

81040_5.book Page 38 Monday, February 20, 2006 2:39 PM
38
At the start of the
from Speed
calibration - sheet 1
Carry out the
return leg of
the second
cal run
At the end
of the return
cal run
speed
press
Speed calibration - sheet 2
9. Carry out a second calibration run (see
flow chart), using the procedure described above in steps 4 to 8.
Note: At the end of this second run, the text End alternating with the new calibration fac-
tor is displayed at the bottom of the screen.
10. Press the speed key to leave distance calibration and return to the Instru-
ment status screen.
ST60 Tridata Instrument Owner's Manual
outward cal run
press
speed
Press
and
depth
to store cal factor
Alternating
Carry out the
outward leg of
the second
cal run
At the end of the
speed
outward cal run
press
At the start of
the return cal
run press
speed
Press
speed depth
to return to
Instrument status display
(Intermediate calibration)
sheet 2 Speed calibration
of the
D4421-1