Depth; Current Depth Display - Raymarine ST60 Tridata Instrument Owner's Handbook Manual

81040_5.book Page 2 Monday, February 20, 2006 2:39 PM
2
• Using the trip key to gain access to log, trip, water temperature and timer
information.
All key presses are momentary unless otherwise stated.

Depth

Use the depth key to select the required information, as shown in the
depth key
illustration. The depth measurement units are either feet or metres, as
selected during user calibration (see
Shallow
alarm threshold
depth
Deep
alarm threshold
Using the depth key

Current depth display

The current depth screen shows the title DEPTH, the selected depth units and the
depth measurement. It also shows a depth trend indicator, which is either an up
arrow to show seabed rising or a down arrow to show seabed falling.
If for any reason depth information is lost, the DEPTH title will flash once per
second and the displayed depth value will be the last good reading.
ST60 Tridata Instrument Owner's Manual
Chapter 4, Calibration
Current depth
depth
To enable/disable any alarm
for 2 seconds
Press reset
(toggle action)
To enter and exit alarm adjust mode
Press trip reset
and
In adjust mode, use
trip
to decrease or
depth
).
depth
Anchor deep
alarm threshold
together
depth
Anchor shallow
reset
to increase
alarm threshold
Using the
D4413-1