Permanent Power Supply; Service; Figure 7: Label With The Production Data In The Input Unit; Figure 8: Information On The Label - Kaba Combi B 30 Operating Instructions Manual

Operating instructions 82132/3XXX - Combi B 30
28.3

Permanent power supply

If necessary, along with the battery power supply the lock can also be supplied with voltage permanently. The following options
are available for this purpose:
a) Power supply via the intruder detection system and the alarm box (art. no. 3001001550
b) Power supply via the alarm box (see above) for connection to the signalling equipment without power supply option via
the additional 12V power supply unit at the alarm box (see above) art. no. 3002501230
c) If the lock is used without any signalling equipment: 9V power supply unit can be connected directly at the lock,
art. no. 3002501220
Even with the permanent power supply the batteries must still be inserted into the input unit because otherwise the lock
cannot be opened by means of the code entry in case of power failure or a fault of the permanent power supply. The
undervoltage indication is displayed in case of the permanent power supply failure and exhausted battery (see chapter
13.1). The batteries and the permanent power supply should be checked as soon as possible in this case.
29

Service

In case of faults or service tasks described in this manual it is highly recommended to consult a professional service technician
or the safe manufacturer.
The lock has a label with the production data on the input unit, these data that might be helpful, for example in case of the first
telephone consultation or in case of service for the initial fault localization. If you would like to access these data, open the input
unit similarly as for the battery replacement described in chapter 13.2.
The label is clearly visible on the inside of the top part of the input unit:
Figure 15: Label with the production data in the input unit
The label contains the following information:
Figure 16: Information on the label
)
Lock type
Article number of the input unit
Serial number of the input unit
Version number of the firmware
and year of manufacture
Version 2014-02-28
Page 47 of 48