Table of Contents
Advertisement
3. Follow the graphic on the battery label to insert the
battery pack properly.
Hold the battery so that the black tab on the front edge
of the battery is up and facing the door latch (this tab
helps you pull the battery out). Place the back edge
in first, gently pushing it underneath the two battery
catches. Rotate the front edge down until it is in position.
!
CAUTION: Do not insert the battery pack straight down.
Damage to the unit could occur.
4. Replace the door and press down on it until the latch
pops into the locked position (from this view, the left side
of the door is inserted first).
5. Attach the appropriate plug for your country into the
AC wall charger and plug it into a wall socket. Plug the
other end into the DC power jack on the Mesa 3.
Note: Use the AC wall charger that came with the Mesa
3 or an approved charger.
(A)
TO ENSURE DOOR SEAL, INSERT SIDE (A) FIRST!
PARA VEDAR A PORTA, INSIRA O LADO (A) PRIMEIRO!
PARA SELLAR LA PUERTA, INSERTE PRIMERO LADO (A)
ERST SEITE (A) EINLEGEN – SICHERT TÜRDICHTUNG!
P/ VEDAR A PORTA, INSIRA O LADO (A) PRIMEIRO!
(A)
Black Tab
Chapter 1 Getting Started
5
Hide quick links:
Advertisement
Table of Contents
