Juniper Mesa 3 Owner's Manual page 62

FEATURE
UHF RFID
(Option)
Barcode 1D/2D
Imager (Option)
RS-232 (Option)
58
Mesa 2 Rugged Tablet Powered by Android Owner's Manual
SPECIFICATION
Optional built-in UHF RFID module
„
and antenna
Region-specific frequency
„
configurations (859–873 MHz & 915–
930 MHz)
EPCglobal Gen 2 (ISO 18000-6C)
„
protocol support
Wide output range (0 dBm to +27
„
dBm)
Imager and Decoder: Motorola/
„
Symbol SE4710 imager and PL3307C
400 MHz decoder
Sensor Resolution: 1280 x 800
„
Field of View: Horizontal 42°, vertical
„
28°
Reading Angles: Skew & pitch ±60°,
„
roll 360°
Read Range: 1" to 24" depending on
„
code type, size, and density
Aiming dot: Visible with low light
„
illumination
Symbologies: All common 1D, 2D
„
(PDF417, MicroPDF417, Composite, RSS,
TLC-39, Data matrix, QR code, Micro
QR code, Aztec, MaxiCode, Postal
codes, etc.)
Trigger Buttons: Programmable
„
Barcode Connector™ Utility: Wedge
„
and configuration
Power: 1.49 W active, 0.54 W standby,
„
8 mW sleep; by default device returns
to sleep after 1 second of inactivity
RS-232C 9-pin D-sub connector
„
Hardware option for either 5 V @ 600
„
mA or 12 V @ 390 mA available on
pin 9 (ring in)