Nonconcurrent Procedure (System-Unit Powered Off) - IBM AS/400e Manual

Setting up your expansion unit

Hide thumbs Also See for AS/400e:

User manual (19 pages)

User handbook manual (834 pages)

Manual (46 pages)

Table Of Contents

Table of Contents

Press the Enter key.

__ 46. Add the number of the ASP you want to add the disk unit to. The system

ASP is ASP 1.

Press the Enter key.

__ 47. The Confirm Add Units display appears showing the configuration your

system will have when the add completes.

Note: If you have selected the wrong ASP, press F12 to change your

Press the Enter key to continue. The add process will take several minutes

to complete.

__ 48. Install the disk unit shield cover .

__ 49. Install the system unit front cover.

__ 50. If you have a printer, print the configuration list. A service representative

may refer to the configuration list in the future.

a. On the AS/400 Main menu command line type:

Note: You need to be signed on with service authority.

STRSST

Press the Enter key.

b. On the STRSST display, select Start a service tool option.

Press the Enter key.

c. On the Start a Service Tool display, select Hardware service manager

option.

Press the Enter key.

d. From the Hardware Service Manager display, press F6 (print the

configuration).

e. To return to the AS/400 Main menu, press F3 (Exit) twice and then

press the Enter key.

f. Place the configuration list in the Basic System Operation, Administration,

and Problem Handling, SC41-5206-04 book.

__ 51. For information on how to make your disk unit operational, go to the

AS/400 Information Center. You can access the Information Center from the

AS/400 Information Center, SK3T-2027-03 or from the following web site:

http//www.as400.ibm.com/infocenter

__ 52. Keep all miscellaneous parts, such as wrap connectors, with the Service

Materials box or in a safe place.

The installation of the disk unit is complete.