Satel CA-6 KLED-S Quick Start Manual

The CA-6 KLED-S keypad is designed for operating and programming the CA-6 alarm
control panel. Information on the security system status is provided by 16 LED
indicators and acoustic signals. The keypad has 12 keys intended for entering data
and launching selected functions. The keys can be illuminated, and operations with
keys can be audibly acknowledged.
LED indicators show the current status of 2 partitions and 8 zones of the control panel:
(green color) – the LED indicates the control panel power status:
POWER
− ON – mains supply and battery OK,
− blinking – low battery,
− OFF – AC loss.
(green color) – LED ON indicates that the telephone line is occupied by
PHONE
the control panel.
(yellow color) – blinking LED indicates there is a failure in the alarm
TROUBLE
system.
- 2 LEDs (red color), designated "A" and "B", assigned to partitions –
ALARM
alarm is signaled by the LED blinking. The LED goes out after alarm reset.
- 2 LEDs (green color), designated "A" and "B", assigned to partitions –
ARMED
armed status is signaled by the LED ON. The blinking LED indicates the
countdown of the exit delay time.
®
Fig. 1. View of the keypad.
KEYPAD
CA-6 KLED-S
ca6kled-s_e 03/06