Ending The Treatment; Maintenance And Care; Preparation - Pari SINUS 028 Instructions For Use Manual

The larger the hole, the less the resistance. Take extra
care not to make the hole too large, since this will mean
that resistance is too low during breathing. The vibration
must be felt at all times during the treatment session.
• Push the inside of the nasal plug back in.

3.3 Ending the treatment

• Switch the compressor off.
• Place the nebuliser back in its holder.
• Disconnect the power plug from the mains socket.
Complete disconnection from the mains is only certain
when the power plug has been unplugged from the socket.
4

MAINTENANCE AND CARE

4.1 Preparation

• Pull the two tubes and the adapter off the nebuliser.
• Detach the adapter from the tube.
• Open the cap of the nebuliser.
• Make sure that all medication residues are removed from
the nebuliser.
• Dismantle the nebuliser into its individual parts.
• Rinse all components of the nebuliser under running tap wa-
ter. This must be done especially thoroughly if cleaning and
disinfection are not carried out straight away.
– 67 –