Pari SINUS 028 Instructions For Use Manual page 70

Also please check the filter at regular intervals (after every
10 applications). If it is soiled (grey or brown colour) or blocked,
replace it. The filter must also be replaced with a new one if it
has become damp.
The filter cannot be cleaned and then reused!
To replace the filter, proceed as follows:
• Unscrew the filter holder from
your compressor using a suit-
able coin.
• Pull the old filter out of the filter
holder and fit the new filter in
its place.
• Reinsert the filter holder together with the new filter in your
compressor and screw it tight with the coin.
Repairing
The compressor must only be serviced by the PARI GmbH
Technical Service department or a service centre expressly au-
thorised by PARI. If the compressor is opened or manipulated
by anyone else, all claims under the warranty shall be void. In
these cases, PARI GmbH will also accept no liability.
Storage
NOTICE
Damage to the power cord by kinking
If the power cord is wound or bent very tightly, the wires in-
side the cable may break. This will render the power cord
unusable.
• Do not wind the power cord around the compressor.
– 70 –