Pari SINUS 028 Instructions For Use Manual page 62

Connecting the tubes
The following section describes how to connect the
PARI LC SPRINT SINUS nebuliser to the compressor. If you
are using a different nebuliser, the adapter is not required, and
only one of the two tubes is used for the compressed air sup-
ply. Then, the vibration connection on the compressor is left
free.
• Insert the corresponding end
of the as yet unconnected tube
in the adapter.
• Insert the adapter in the
nebuliser upper section.
• Insert the free ends of both
tubes in the corresponding
connections on the com-
pressor.
Info: The tube ends can be in-
serted more easily if they are
twisted slightly when inserting.
– 62 –