Remote Control - EdilKamin PELLINSERT 54 Installation, Use And Maintenance Manual

REMOTE CONTROL

This controls all the functions. To use, it's not necessary tho point directly towards the insert.
Key to buttons and display:
: to turn off and on (to go from remote control on stand-by to remote control on)
+/-
: to increase/decrease the various regulations
: to select Automatic function
A
: to select Manual function and access the control and programming menus
M
The display also shows other useful information in addition to the icons described above.
- Stand-by position:
shows room temperature (20°C), kg of pellets (15 kg) remaining in tank and current time (15.33)
- Manual work phase:
shows power set (Power 1), fan level set (F2), room temperature (20°C), kg of pellets and autonomy remaining (15 kg
21 hrs)
- Automatic work phase:
shows temperature set (Set 22°C), room temperature (20°C), kg of pellets and autonomy remaining (15 kg 21 hrs).
- icon flashing: remote control searching for network
- icon fixed: remote control with connection enabled
flat battery
(3 mini alkaline batteries type AAA)
keypad locked
(press "A" and "M" in parallel for a few seconds to lock
or unlock the keypad)
programming enabled
alphanumeric display consisting
of 16 figures arranged in two lines
of 8 figures
fan speed indicator
- icon flashing: Insert turning on
- icon fixed: Insert working
manual adjustment function
(display shows working power)
temperature indicator
automatic function
(display shows temperature)
26