Remote Control - EdilKamin Point Plus Installation, Use And Maintenance Manual

REMOTE CONTROL

01 :
to turn the stove on or off
Menù:
opens the menu
+/– :
increases or decreases the various settings
To use the remote control, point it towards the stove.
A beep indicates that the signal has been received, which is
then confi rmed by execution of the command.
The most frequent cause of remote control malfunction is con-
nected with the batteries running out: replace them, taking care
to dispose of the exhausted batteries correctly.
To replace the batteries, open the lower panel of the remote
control using a fl at screwdriver.
In accordance with Art. 13 of the Legislative Decree No. 151, dated 25 July 2005, "Implementation of Directives: 2002/95/
EC, 2002/96/EC and 2003/108/EC, pertaining to the reduction of hazardous substances used in electrical and electronic
equipment, as well as disposal of waste".
The crossed-out wheeled bin symbol shown on the equipment or on the packaging indicates that the product must be dispo-
sed of separately at the end of its useful life. Therefore, at the end of the equipment's useful life, the user must hand in the
equipment to suitable collection facilities for electrical and electronic waste, or return it to the retailer when a new, equiva-
lent appliance is purchased in a ratio of one to one.
INSTRUCTIONS FOR USE
INFORMATION FOR USERS
- 36
-