Installation Tips; Burner Installation - Travis Industries 864 HO NB Diamond-Fyre Installation Instructions Manual

Hide thumbs Also See for 864 HO NB Diamond-Fyre:

Installation Tips

If using propane (LP), convert the appliance before installing the burner.

NOTE FOR OLDER 864 HO NB UNITS

Older units were shipped with front and side burner skirts pre-installed. Remove these skirts before

proceeding.

Side Burner Skirt

Front Burner Skirt

Remove the 7 screws holding the front and side burner skirts in place. The skirts may be discarded (keep

the screws).

Make sure to replace the 4 screws (2 on each side) that hold the side burner skirts in place (plugging the

holes in the valve tray).

NOTE FOR OLDER UNITS WITH SIT PILOT ASSEMBLY

If you have an older unit with a SIT pilot assembly (see picture to

the right), you will need to replace the 2-way pilot hood with a SIT

3-way pilot hood (order part # 250-02205).

Page 2 of 13

864 HO NB Diamond-Fyre Burner

Installation Instructions

17601700 — 2/27/14

(sku: 96900142)

Side Burner Skirt