Travis Industries 864 HO NB Diamond-Fyre Installation Instructions Manual page 9

864 HO NB Diamond-Fyre Burner
Installation Instructions
(sku: 96900142)
19. Remove the 2 screws holding the media tray to the burner (keep the screws).
DRIFTWOOD MEDIA
Use the 4 screws included with this kit to secure the two brackets (also included with this kit) to the back of
the burner.
Install the air deflector (included with this kit) into the brackets as shown below.
IMPORTANT: See page 13 after installing the burner for the final steps critical for correct setup.
Page 9 of 13 17601700 — 2/27/14 © Travis Industries, Inc.