Travis Industries 864 HO NB Diamond-Fyre Installation Instructions Manual page 8

18. Install the firebacks as shown below.
a) Remove the side fireback clips from the firebox ceiling near the front (both sides). The side fireback
clips have a keyhole slot and can be removed by loosening the screw and sliding the clip out.
b) Install the rear fireback.
c) While holding the rear fireback in place, install the side firebacks (both sides).
NOTE: The notch on the side fireback is on the bottom side, facing forward.
d) Replace the clips removed in step (a) to secure the firebacks.
Page 8 of 13
864 HO NB Diamond-Fyre Burner
Installation Instructions
17601700 — 2/27/14
(sku: 96900142)
© Travis Industries, Inc.