Main Menu - Data Readouts - Group 16 - Trane TR200 Series Programming Manual

Parameter Description

Main Menu - Data Readouts - Group 16

16-** Data Readouts
Parameter group for data read-outs, e.g. actual references, voltages, control, alarm, warning and status words.
16-0* General Status
Parameters for reading the general status, e.g. the calculated reference, the active control word, status.
16-00 Control Word
Range:
0 N/A* [0 - 65535 N/A]
16-01 Reference [Unit]
Range:
0.000 [-999999.000 - 999999.000
Referen- ReferenceFeedbackUnit]
ceFeed-
backU-
nit*
16-02 Reference [%]
Range:
0.0 %* [-200.0 - 200.0 %]
16-03 Status Word
Range:
0 N/A* [0 - 65535 N/A]
16-05 Main Actual Value [%]
Range:
0.00 %* [-100.00 - 100.00 %]
16-09 Custom Readout
Range:
0.00 [-999999.99 - 999999.99
Custom- CustomReadoutUnit]
Readou-
tUnit*
170
Function:
View the Control word sent from the frequency converter via the serial
communication port in hex code.
Function:
View the present reference value applied on impulse or analog basis in
the unit resulting from the configuration selected in par.1-00
tion Mode (Hz, Nm or RPM).
Function:
View the total reference. The total reference is the sum of digital, analog,
preset, bus, and freeze references, plus catch-up and slow-down.
Function:
View the Status word sent from the frequency converter via the serial
communication port in hex code.
Function:
View the two-byte word sent with the Status word to the bus Master
reporting the Main Actual Value.
Function:
View the user-defined readouts as defined in par.0-30
Unit, par.0-31 Custom Readout Min Value
Max Value.
Configura-
Custom Readout
and par.0-32 Custom Readout
TR200 Programming Guide