Parameter Description
Parameter Selection
Main Menu Structure
Parameters for the frequency converter are grouped into various parameter groups for easy selection of the
correct parameters for optimized operation of the frequency converter.
The vast majority of TR200 applications can be programmed using the Quick Menu button and selecting the
parameters under Quick Setup and Function Setups.
Descriptions and default settings of parameters may be found under the section Parameter Lists at the back of
this manual.
0-xx Operation/Display
1-xx Load/Motor
2-xx Brakes
3-xx Reference/Ramps
4-xx Limits/ Warnings
5-xx Digital In/Out
6-xx Analog In/Out
8-xx Comm. and Options
9-xx Profibus
38
10-xx CAN Fieldbus
11-xx LonWorks
13-xx Smart Logic Controller
14-xx Special Functions
15-xx FC Information
16-xx Data Readouts
18-xx Info & Readouts
20-xx FC Closed Loop
21-xx Ext. Closed Loop
22-xx Application Functions
23-xx Time Based Functions
24-xx Application Functions 2
TR200 Programming Guide