Superabrasive
9.7 REPLACING THE PULLEY UNITS
Dismount guard and top cover as previous described.
Figure 9.7.1
Figure 9.7.4
Figure 9.7.7
Figure 9.7.10
Dismounting the driving pulley: take the top screw out to release the bushing (Fig.9.7.1), push the bushing together with the
washer up (Fig.9.7.2), push washer down of the bushing (Fig.9.7.3)., take bushing out (Fig.9.7.4), push key out (Fig.9.7.5), now the
washer releases (Fig.9.7.6), dismount sealer cap (Fig.9.7.7)(Fig.9.7.8), the pulley can be released with two crowbars but do not use
excessive force (Fig.9.7.9), push the sealer cap to dismount (Fig.9.7.10), by mounting back secure with sealant (Fig.9.7.11), center
the holes to mount the pulley (Fig.9.7.12).
Figure 9.7.13
User Manual
Figure 9.7.2
Figure 9.7.5
Figure 9.7.8
Figure 9.7.11
Figure 9.7.14
Original Language
18
Lavina® 25LM‐S‐E
Figure 9.7.3
Figure 9.7.6
Figure 9.7.9
Figure 9.7.12
Figure 9.7.15
12/2014