Sony HT-G700 Operating Instructions Manual page 45

C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm
010COV.book Page 45 Wednesday, September 18, 2019 1:58 PM
is canceled and the system
returns to the previous status.
 Set the night mode to off (page 29).
Sound skips or has noise.
 If there is a device nearby that
generates electromagnetic waves,
such as a wireless LAN or a
microwave oven in use, locate the
system apart from it.
 If there is an obstacle between the
bar speaker and the subwoofer,
move or remove it.
 Do not cover the top of the bar
speaker with metal objects such as TV
frame, etc. Wireless functions may
become unstable.
 Locate the bar speaker and the
subwoofer as close as possible.
 Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to 5 GHz range.
 Switch the network connection of the
TV or Blu-ray Disc player from
wireless to wired.
Mobile Device Connection
Pairing cannot be achieved.
 Bring the system and the BLUETOOTH
device closer together.
 Make sure the system is not receiving
interference from a wireless LAN
device, other 2.4 GHz wireless
devices, or a microwave oven. If a
device that generates
electromagnetic radiation is nearby,
move the device away from the
system.
BLUETOOTH connection cannot be
completed.
 Make sure that the BLUETOOTH
indicator on the bar speaker is lit
(page 24).
 Make sure the BLUETOOTH device to
be connected with is turned on and
the BLUETOOTH function is enabled.
 Bring the system and the BLUETOOTH
device closer together.
 Pair the system and BLUETOOTH
device again. You may need to cancel
the pairing with the system using
your BLUETOOTH device first.
 Pairing information may be deleted.
Perform pairing operation again
(page 24).
Sound of the connected
BLUETOOTH mobile device is not
output from the system.
 Make sure that the BLUETOOTH
indicator on the bar speaker is lit
(page 24).
 Bring the system and the BLUETOOTH
device closer together.
 If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from the system.
 Remove any obstacle between the
system and the BLUETOOTH device or
move the system away from the
obstacle.
 Reposition the connected
BLUETOOTH device.
 Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to 5 GHz range.
 Increase the volume on the
connected BLUETOOTH device.
Remote Control
The remote control of the system
does not function.
 Point the remote control at the
remote control sensor on the bar
speaker (page 11).
 Remove any obstacles in the path
between the remote control and the
system.
 Replace both batteries in the remote
control with new ones, if they are
weak.
 Make sure you are pressing the
correct button on the remote control.
masterpage:
Right
45
US
HT-G700
5-013-058-11(1)