Sony HT-G700 Operating Instructions Manual page 35

C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm
010COV.book Page 35 Wednesday, September 18, 2019 1:58 PM
Items
[AUDIO] [DRC]
(Audio (Audio DRC)
settings)
[SYNC]
(A/V Sync)
[DIALOG]
(DTS Dialog
Control)
[EFFECT]
(Sound Effect)
Function
You can compress the dynamic range of the sound track.
[AUTO]: Automatically compresses sound encoded in Dolby
TrueHD.
[ON]: Reproduces the dolby and DTS sound track with the
kind of dynamic range that the recording engineer intended.
[OFF]: No compression of dynamic range.
When the sound does not match the pictures on the TV
screen, you can adjust the delay between the picture and
sound. You can adjust from 0 msec to 120 msec in 40 msec
increments.
The default setting is [0ms].
By adjusting the dialog volume, you can easily listen to
dialog since it stands out from the ambient noise. This
function works while playing content that is compatible with
the DTS:X dialog control function.
You can adjust from 0 dB to 6 dB in 1 dB increments.
The default setting is [0dB].
You can select sound effects such as the sound mode.
• [SOUND MODE ON]: Vertical Surround Engine enhances the
surround and height speaker channels to create an
immersive and enveloping virtual surround effect such as
sound mode (page 28) and vertical surround (page 27).
• [DOLBY SPEAKER VIRTUALIZER]: Dolby Speaker Virtualizer
enhances the surround and height speaker channels to
create an immersive and enveloping virtual surround effect
when you play Dolby format. Disables sound effects other
than Dolby format.
• [DTS VITRUAL:X]: DTS Virtual:X is enabled. DTS Virtual:X
Technology in the system puts you in the middle of multi
speaker.
• [OFF]: Disables the sound effects. Select this when you do
not want to set the upper limit of sampling frequency.
masterpage:
Right
35
US
HT-G700
5-013-058-11(1)