Sony HT-G700 Operating Instructions Manual page 38

C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm
010COV.book Page 38 Wednesday, September 18, 2019 1:58 PM
Items
[UPDATE] [START]
(Updating the
system)
[CANCEL]
38
US
Function
Select this to start the software update after connecting the
USB memory on which the software update file is stored to
the system. For information about the software update, visit
the following website:
https://www.sony.com/am/support
Notes
• Before updating, make sure that the subwoofer is turned
on and connected to the system.
• You can update the software of the system by pressing and
holding  and the BLUETOOTH button on the bar speaker
for 7 seconds.
If the USB device is not recognized
• Try the following:
Turn the system off.
Remove and reconnect the USB device.
Turn the system on.
• Make sure that the USB device is securely connected to the
UPDATE port.
• Check to see if the USB device or a cable is damaged.
Cancels the software update.
masterpage: Left
HT-G700
5-013-058-11(1)