Sony HT-G700 Operating Instructions Manual page 36

C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm
010COV.book Page 36 Wednesday, September 18, 2019 1:58 PM
Items
[HDMI] [CONTROL FOR
(HDMI HDMI]
settings)
[STANDBY
THROUGH]
[TV AUDIO]
[EARC]
[FORMAT]
(HDMI Signal
Format)
36
US
Function
• [ON]: The Control for HDMI function is enabled. Devices
connected with an HDMI cable can control each other.
[ ]:
• OFF Off
This function is available when you set [CONTROL FOR HDMI]
to [ON].
• [AUTO]: Signals are output from the system's HDMI OUT
(TV eARC/ARC) jack when the TV is turned on while the
system is not turned on. The system standby power
consumption can be reduced more than when set to [ON]
by turning off the connected TV.
• [ON]: Signals are always output from the system's HDMI
OUT (TV eARC/ARC) jack when the system is not turned on.
If you connect a TV other than those manufactured by
Sony, we recommend that you select this setting.
• [OFF]: Signals are not output from the system's HDMI OUT
(TV eARC/ARC) jack when the system is not turned on. Turn
on the system to enjoy on the TV content of a device
connected to the system. The system standby power
consumption can be reduced more than when set to [ON].
You can set the playback sound that is input from whether
an HDMI cable or optical digital cable.
• [AUTO]: Plays the sound by selecting the cable for the TV
input automatically depending on which audio signal is
input first when you connect both an HDMI cable and
optical digital cable. When you connect either HDMI cable
or optical digital cable, the system plays by selecting the
connected cable for the TV input.
• [OPTICAL]: Plays the sound from the TV IN (OPT) jack for the
TV input.
You can transfer the signals of the object audio content,
such as Dolby Atmos - Dolby TrueHD and DTS:X, or multi-
channel LPCM content using an HDMI cable by connecting
the system and TV compatible with eARC.
• [ON]: Enables the eARC function. Use this setting when the
system is connected to a TV compatible with eARC.
• [OFF]: Use this setting when the system is not connected to
a TV compatible with eARC.
Note
When [EARC] is set to [ON], make sure of the eARC setting of
the connected TV. For details, refer to the operating
instructions of the TV.
You can select the HDMI signal format for the input signal.
For details, see "Setting the HDMI Signal Format to Watch 4K
Video Content" (page 21).
masterpage: Left
HT-G700
5-013-058-11(1)