Adjusting The Volume; Enjoying Multiplex Broadcast Sound (Audio) - Sony HT-G700 Operating Instructions Manual

C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\060LST.fm
010COV.book Page 23 Wednesday, September 18, 2019 1:58 PM

Adjusting the Volume

To adjust the system volume
Press  +/–.
The volume level appears in the front
panel display.
To adjust the subwoofer volume
Press SW  (subwoofer volume) +/–.
The volume level appears in the front
panel display.
The subwoofer is designed for playback
of bass or low frequency sound.
Notes
• When the input source does not contain
much bass sound, such as in TV
programs, the bass sound from the
subwoofer may be difficult to hear.
• SW  +/– does not work when the
subwoofer is not connected.
Enjoying Multiplex
Broadcast Sound (AUDIO)
You can enjoy multiplex broadcast
sound when the system receives a
Dolby Digital multiplex broadcast signal.
 +/–
SW  +/–
1
Press AUDIO.
The audio signal appears in the front
panel display.
2
Press the button repeatedly to
select the desired audio signal.
Audio signal
[MAIN]
[SUB]
[M/S]
Notes
• To receive a Dolby Digital signal, you
need to connect the TV that is compatible
with eARC or ARC (page 32) to the HDMI
OUT (TV eARC/ARC) jack with the HDMI
cable (supplied), or other devices to the
masterpage:
Right
AUDIO
Explanation
Sound of the main
language will be
output.
Sound of the sub
language will be
output.
Mixed sound of both
the main and sub
languages will be
output.
23
US
HT-G700
5-013-058-11(1)