Sony HT-G700 Operating Instructions Manual page 42

C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm
010COV.book Page 42 Wednesday, September 18, 2019 1:58 PM
channel that you want using the TV
remote control.
 When there is no picture while the
HDMI input is selected, press the
playback button of the connected
device.
 Disconnect the HDMI cable, then
connect it again. Make sure that the
cable is firmly inserted.
 When there is no picture from the
connected device or the picture from
the connected device is not output
correctly, set [HDMI] - [FORMAT] to
[STANDARD] (page 36). Some
pictures of an old type device may not
displayed correctly while [HDMI] -
[FORMAT] is set to [ENHANCED].
 If no picture appears while
connecting the device with the HDMI
cable, make sure that the device is
connected to the HDMI IN jack and
the TV is connected to the HDMI OUT
(TV eARC/ARC) jack.
 The system is connected to an input
device that is not HDCP (High-
bandwidth Digital Content
Protection) compliant. In this case,
check the specifications of the
connected device.
3D content from the HDMI IN jack
does not appear on the TV screen.
 Depending on the TV or video device,
3D content may not appear. Check
the supported HDMI video format
(page 51).
4K video content from the HDMI IN
jack does not appear on the TV
screen.
 Depending on the TV or the video
device, 4K video content may not
appear. Check the video capability
and settings of your TV and video
device.
 The picture may not be displayed
properly if [HDMI] - [FORMAT] is set to
[ENHANCED]. In this case, set it to
[STANDARD] (page 36).
 Use a Premium High Speed HDMI
Cable with Ethernet that supports 18
42
US
Gbps or High Speed HDMI Cable with
Ethernet (page 51).
 If the system is connected to the
HDMI jack that is not compatible with
HDCP2.2 or HDCP2.3, [ERROR: TV
DOES NOT SUPPORT HDCP2.2 or 2.3]
appears in the front panel display.
Connect to the HDMI jack compatible
with HDCP2.2 or HDCP2.3 of the 4K TV
or 4K device.
An image is not displayed on the
entire TV screen.
 The aspect ratio on the media is fixed.
Picture and sound of the device that
is connected to the system are not
output from the TV when the
system is not turned on.
 Set [HDMI] - [STANDBY THROUGH] to
[AUTO] or [ON] (page 36).
 Turn on the system, and then switch
the input for the device playing.
HDR contents cannot show as high-
dynamic range.
 Check the settings of the TV and
connected device. For details, refer to
the operating instructions of your TV
and the connected device.
 Some devices may convert HDR
contents to SDR if the bandwidth is
not enough. In that case, be sure that
[HDMI] - [FORMAT] is set to
[ENHANCED] (page 36) if the TV and
the connected device support a
bandwidth of up to 18 Gbps. When
[ENHANCED] is set, be sure to use a
Premium High Speed HDMI Cable
with Ethernet that supports 18 Gbps
(page 51).
Sound
The system cannot connect to a TV
with the BLUETOOTH function.
 When you connect the system and TV
with the HDMI cable (supplied), the
BLUETOOTH connection is canceled.
Disconnect the HDMI cable, then
masterpage: Left
HT-G700
5-013-058-11(1)