Sony HT-G700 Operating Instructions Manual page 14

C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\040PRE.fm
010COV.book Page 14 Wednesday, September 18, 2019 1:58 PM
3
Fasten the screws into the marks
() on SCREW LINE () of WALL
MOUNT TEMPLATE as in the
illustration below.
368.5 mm
(14 1/2 in)
Screws
10.5 mm to
11.5 mm
(approx.
7/16 in)
4
Remove WALL MOUNT TEMPLATE.
5
Hang the bar speaker on the
screws.
Align the holes of the rear of the bar
speaker with the screws, then hang
the bar speaker on the two screws.
14
US
Notes
• When sticking WALL MOUNT TEMPLATE,
smooth it out fully.
• When you do not use WALL MOUNT
TEMPLATE, install the bar speaker apart
368.5 mm
from the TV by 70 mm (2 3/4 in) or more.
(14 1/2 in)
Marks ()
masterpage: Left
HT-G700
5-013-058-11(1)