Correcting Wide-Angle Distortion - GE Everest XLG3 VideoProbe Operating Manual

56 Chapter 5 Capturing Images and Videos

Correcting Wide-Angle Distortion

Distortion correction is part of the image processing package. (See
Processing Package"
When you use an optical tip with a 120° field of view, the image edges are distorted.
You can improve such images by turning on distortion correction.
Note
To Turn On Distortion Correction
1. While viewing a live image with a 120° optical tip installed, press
2. Select Image > Distortion Correction > 120 Deg.
Note
To Turn Off Distortion Correction
1. Press
2. Select Image > Distortion Correction > Off.
on page 4.)
120° optical tip,
distortion correction off
120 Deg annotation on image is saved with the image.
If you enter a measurement mode, a corrected image reverts to its
uncorrected state for accuracy.
.
GE Inspection Technologies XLG3 VideoProbe System
"About the Image
120° optical tip,
distortion correction on
.