Restoring Factory Defaults - GE Everest XLG3 VideoProbe Operating Manual

16 Chapter 1 Introduction

Restoring Factory Defaults

To restore factory defaults press and hold the Save
seconds. Then confirm restoration of factory defaults. Performing this action restores the
following options.
•
•
•
•
•
•
•
•
Note
Battery Icon . ....... ............ ..... On
Date/Time............................. ..... On
Logo..................................... ..... On..
Temperature Icon .................. ..... On
Text Color . ............................. ..... Green
Image Format....................... ..... JPG
Measurement Accuracy Index ... On
Units of Measurement . ................ Inches
Upon next restart of VideoProbe, after restoring factory defaults, select the
desired language from the initial language selection screen.
GE Inspection Technologies XLG3 VideoProbe System
and Record Buttons for five