GE Everest XLG3 VideoProbe Operating Manual page 44

36 Chapter 3 Setting Up and Putting Away the System
5. Select or enter a network access point.
•
•
•
•
If at least one wireless network name (SSID) - access point is listed under the
Auto Detect tab (shown previously), select the desired access point. Select Save
and Make Default.
If no access points are listed, see Manual Entry below.
Under SSID, enter the name of the local access point. If a pass key is required for
security, enter the pass key (from your network administrator.) Select Save and
Make Default.
If you want to see or manage the access points that have been saved, click the
Saved Settings tab.
GE Inspection Technologies XLG3 VideoProbe System
You can enter access points manually
under the Manual Entry tab.
Up to five access points may be listed under
the Saved Settings tab. If five access points
are already saved and you want to use a
different one, delete one from this list.